Epoxy & Polyurea Flake Floors in the Rio Grande Valley
Full-broadcast flake floors for garages, patios and commercial spaces — in both polyurea and epoxy systems.
A Floor That Outlasts the Concrete Under It
A flake floor is a layered system, not a coat of paint. The concrete is mechanically ground, cracks are repaired, a base coat goes down, vinyl flake is broadcast into it, and the whole thing is locked in under a clear topcoat. The result resists hot tires, dropped tools, oil and UV, and it cleans with a mop.
We install two systems — polyurea flake and epoxy flake — and recommend one based on your slab, its moisture level, and how soon you need the floor back. We do not install metallic epoxy.
What's Included
- Polyurea flake system
- Epoxy flake system
- Garage floors
- Patios and walkways
- Commercial and warehouse floors
- Concrete grinding and prep
- Crack and joint repair
- Integral cove base
Our Flake Floor Process
A flake floor only performs as well as the preparation underneath it. Every installation follows the same sequence, and we do not skip the unglamorous steps that decide whether a floor lasts a decade or peels in a season.
-
Assessment and Moisture Check
We look at the slab first: its condition, existing coatings, cracks, and how much moisture is coming through it. That determines which system can go down.
-
Mechanical Grinding
The concrete is ground with diamond tooling to open the surface up. Acid etching is not a substitute — grinding is why a flake floor bonds and stays bonded.
-
Repairs
Cracks, spalls, pits and control joints are filled and leveled so they do not telegraph through the finish.
-
Base Coat and Flake Broadcast
The pigmented base coat goes down and vinyl flake is broadcast into it to full refusal, giving even color and a consistent texture.
-
Scrape and Vacuum
Once cured, loose flake is scraped back and vacuumed off, leaving a uniform surface ready for the topcoat.
-
Clear Topcoat
One or more clear coats seal the flake in and set the final sheen and slip resistance.
The result is a seamless, non-porous floor that stands up to traffic, chemicals and South Texas heat — and looks like it belongs in the space.
Why Choose Armored Painting
Floor coatings fail for predictable reasons: poor preparation, the wrong system for the slab, and moisture nobody checked. We build every floor around avoiding all three.
Get a Free Quote-
Polyurea or Epoxy
Polyurea cures fast and stays flexible and UV-stable, which suits garages and anything seeing sun. Epoxy builds a thicker, harder film at a lower cost. We match the system to the slab rather than selling one answer.
-
Flake, Not Metallic
Flake systems hide slab imperfections, add slip resistance, and wear far better underfoot. It is the only floor finish we install.
-
Ground, Not Etched
Every floor is mechanically ground before anything is applied. It is the difference between a coating that lasts and one that peels.
-
Built for the Valley
Systems and topcoats chosen for RGV heat, humidity and slab moisture, by a crew that works in it every day.
Epoxy Flooring FAQs
Turn a dusty slab into the best-looking floor in the house.
What is the difference between a polyurea flake system and an epoxy flake system?
Both are full-broadcast flake floors and look very similar when finished. Polyurea cures much faster, stays more flexible, and holds up better to UV, which makes it a strong choice for garages and sun-exposed slabs. Epoxy builds a thicker, harder film and generally costs less. We will recommend one after looking at your slab.
Do you install metallic epoxy floors?
No. We install flake systems only. Flake is more durable underfoot, hides imperfections in the concrete far better, and offers more slip resistance than a metallic finish.
How long before I can park on it?
It depends on the system and the conditions on the day. Polyurea is usable considerably sooner than epoxy. We will give you exact return-to-service times for your floor before we start.
Can you go over an existing coating?
Sometimes, but usually the right answer is to grind it off. Existing coatings are the most common reason a new floor fails, so we assess what is already down before quoting.
Will it hide cracks in my concrete?
Cracks are repaired before the base coat goes on, and the flake broadcast does a good job of disguising minor variation in the slab. A moving structural crack is a different problem, and we will point it out rather than cover it up.
Our Other Services
Ready for a Free Estimate?
No obligation, no pressure. We serve McAllen, Brownsville and the rest of the Rio Grande Valley.